News

7 PROBLEMS OFTEN ENCOUNTERED WHEN MAINTENANCE IPHONE 5C

Posted by Habibur Rahman on

1.Replace Screen : Screen for iPhone is Tempered Glass ,easy broken , so pls care do not drop your iphone 5c on the ground ,especially ,in cold winter .The LCD and Digititer was Preassembled ,can not be seperated .you must change the full assembly if there any little scrached . 2.No sound when have call ,the problem caused by fall your iphone5c .Symptoms as: everything is fine when no call,all voices are gone once call.The reason:the tap chip of the audio chip on the Motherboard was damaged , this chip made of glass which is provide the voice channel for...

Read more →

TUTORIAL FOR DISASSEMBLE AND ASSEMBLE IPHONE 5S SCREEN

Posted by Habibur Rahman on

First of all,you should shut down the power of iphone 5s ,to shut off the power is the first step to repair any enquipment.First Step ,unscrew the plum blossom screws at the either side of the interface ,you need the special screwdriver tools .The second step,lift the screen with sucker ,you can hold the border with your other hand to help lift the screen,but pls pay attention of the home button,since the touch ID fingerprint sensors have a wire connected to the motherboard.Third step,to remove the wire which connected the touch ID with mainboard ,need a pry knife .to pry...

Read more →

WHAT CAN WE DO WHEN IPHONE 5 SHOWED BLURRED SCREEN

Posted by Habibur Rahman on

Flashtechllc with years of experience in mobile phone repair.especially good at  maintenance different model of samsung and apple screens. The reasons as followed: 1.Flex cable was damaged,the flex cable which connected the mainboard and screen was burned or dropped loose , to solve the problem just need to change a new ribbon cable . 2.Sreen was broken and the LCD was damaged as well ,it is very complicated, you need to change the lcd display preassembled with touch screen digitizer assembly , the cost is high . 3.Main board was damaged that mean you need to change the entire motherboard if...

Read more →

IPAD AIR SCREEN

Posted by Habibur Rahman on

Broken ipad 2 ScreenFirstly,you need to dry the glue to soft with hair dryer ,then open it with no.4 tool and fix it with no.1 tool .Secondly,Undo the 4 screws on the corner !Thirdly ,Put the Bubble cotton on the screen to protect LCD panelsFourth,Turn the LCD panel aroundFifth,Open the buckle and pull the wire of LCD panelSixth,Take the LCD panel out and note the CameraSeven:Open the 2 buckles of the screenEight:Pull the flex cable of the screen and note the 3 BatterryNine:Replace the home button and camera lens to new screen .Ten:Connect the ribbon cable of new screen to...

Read more →

SOMETHING ABOUT IPAD AIR SCREEN

Posted by Habibur Rahman on

The iPad Air screen ,except thinner and lighter ,the performance also improve 8 times too.iPad air promoted their own industrial design greatly .the weight less from 1.4 pounds to 1 pounds ,and the thickness from 9mm to 7.5mm ,the size of the screen is 9.7 ” Why iPad Air is so thickness? iPad Air screen used IGZO technology,it make the screen need less power ,more thinner and light . Ray Soneira’s latest assessment confirmed that the screen’s material was changed from the amorphous silicon (a – Si)to indium gallium zinc oxide (IGZO).In the past few years, there was tumors that...

Read more →


Sale

Unavailable

Sold Out